Tuesday, 9 July 2013

3%

source : google

Make your blog load faster

The speed at which your blog loads is critical to attracting more readers to your blog. If your blog takes a long time to load, many readers may leave your blog before they have the chance to read it. Here are a few tips and tricks that will help your blog load faster and attract more users:

Posts

Your blog's load time can be affected by the number of posts you display on your main page. You can easily edit the number of posts displayed of the main page from the Layout tab. Click Edit in the Blog post section to change the number of posts you want to display on the main page. We recommend displaying 10 or fewer posts on the main page.

Third Party JavaScript and Links

For optimal blog load speed, we recommend using Google/Blogger widgets, JavaScript and links. However, if you need to use third party JavaScript and links, your blog will load much faster if you put all JavaScript at the bottom of your blog. If you have third party JavaScript and links in your sidebar, put them in at the bottom of the sidebar.

Images and Media

The more images, videos and other multi-media you have on your blog the longer it will take to load. However, images and other multimedia are important to attracting users to your blog, so it is important to optimize the load speed of your images and media. Here are a few tips to increase the load speed of your media:
  • Decrease the size of your images or use thumbnails that link to the full-size image.
  • If you use third party images, consider uploading them to Picasa Web Albums via the Blogger post editor.
  • If you have a large number of images to display, you can upload all your images (from a vacation or event) to a Picasa Web Album and link to the album in your post or sidebar.

Other suggestions

  • If you've added any custom CSS to your blog, make sure you put it at the top of the page.
  • The most important content of your blog that catches readers attention should load the quickest. To help you identify which items are taking the longest to load you can use Stopwatch. To use Stopwatch, enter your blog's URL into the text box and click "Start StopWatch". Stopwatch will then open your blog in a frame and will record the time it takes for everything on your blog to load, including images, videos, widgets, etc. Take note of the items that take the longest to load and modify them appropriately using our suggestions.

Monday, 8 July 2013

Top 10 Ways to Speed Up Your Computer's Boot Time

copied from lifehacker

If there's one thing everyone dreads, it's rebooting their computer. It may only take a minute or two, but it can seem like forever. Here are our top 10 tweaks that'll make your computer boot a little faster.

10. Tweak Your BIOS

Top 10 Ways to Speed Up Your Computer's Boot TimeWhen you first set up your computer, your BIOS is set up to make things a bit more convenient for you, but once you're all set up, those things can be disabled. If you hold the DEL key when you start up your computer (or whatever key your BIOS tells you to enter setup), you can turn on the "Quick Boot" option and move your hard disk to the top of the boot priority list. The Quick Boot setting will turn off the tests your computer runs when it first turns on, and the boot priority tweak will tell your computer not to look for CDs, thumb drives, or other media when it first starts, which will get you booted into your OS quicker. If you ever need to boot from CD though, you'll have to go back into the BIOS and change this again before you do.

9. Clean Out Programs that Launch at Startup

Top 10 Ways to Speed Up Your Computer's Boot Time
One of the most tried and true ways to speed up your boot process is to keep unnecessary programs from starting up with your computer. You can do this by running "msconfig" from the Start Menu's search box, and going to the Startup tab. This applications list will tell you what each of those applications does, so you know which ones you can disable and which ones you don't want to. Previously mentioned Soluto is also a fantastic way to clean up these programs, and these days it's got a bunch of other handy features that make it worth a download.

8. Delay Windows Services That Run at Startup

Top 10 Ways to Speed Up Your Computer's Boot Time
Many people argue that disabling Services from "msconfig" will also speed up your boot time, but we've found that this is more problematic than anything. However, you can delay certain startup services so that your computer boots quickly and then worries about them later—after all, you don't need all those services the minute you start up your machine.

7. Change Your Boot Menu's Timeout Values

Top 10 Ways to Speed Up Your Computer's Boot Time
If you're dual-booting your machine, then your boot menu probably has a "timeout value", meaning the amount of time it waits for you to make a selection before it just boots into the default OS. On Windows, this timeout value is often 30 seconds, which is a long time to wait if you aren't looking directly at your screen. To change this timeout value, head to "msconfig" and click on the BOOT.INI tab, and change the number in the timeout box to something lower. If you're dual-booting with Linux, you're probably running the GRUB boot menu, and you canchange the timeout on that too.

6. Disable Unused Hardware

Top 10 Ways to Speed Up Your Computer's Boot Time
Your computer loads a lot of drivers when it first starts up, some of which you might not even use. Head into the Device Manager from the Start Menu's search box, and look for anything you aren't using—Bluetooth controllers, modems, and virtual Wi-Fi adapters are common culprits. Right-click on the entry you want to disable and hit "Disable". Remember to only do this with things you don't actually use—if you use Wireless Hosted Networks, you'll need to keep those virtual Wi-Fi adapters enabled. It's also worth mentioning here that keeping all your drivers up to date will help this portion of the startup time, too (which you can do with the help of a program like previously mentioned Device Doctor).

5. Keep Your Antivirus Running and Up to Date

Top 10 Ways to Speed Up Your Computer's Boot Time
This should go without saying, but we'll say it anyway: install some antivirus software, keep it up to date, and run a regular scan. This is more of a preventative measure than an actual boot-speeding tip, but if you everdo get malware, it's sure to slow your computer's boot time. With a good antivirus around like Microsoft Security Essentials, you'll be more protected against that happening. Don't like MSE? There are somegreat ones out there too, so there's no reason not to have one around.

4. Remove Unnecessary Fonts

Top 10 Ways to Speed Up Your Computer's Boot TimeSEXPAND
Since the dawn of time, Windows has loaded fonts at startup and slowed down the boot time. This is less of a problem than it used to be, but it can still slow you down a bit. Windows 7 loads over 200 fonts at startup; even more if you've installed Microsoft Office. Chances are, you use very few of those fonts, so you can hide them to speed up that process. In Windows 7, open up the Fonts folder from the Start Menu's search box, and check off all the fonts you don't need. Then click the "Hide" button in the toolbar. This way, if you ever want them, you can bring them back, but Windows won't load them at startup. Note that just removing a few fonts probably isn't going to make a noticeable difference—you'll probably need to get rid of a few hundred. That said, you might have hundreds more fonts installed than you realized, so that isn't as ridiculous as it sounds.

3. Upgrade Your RAM

Top 10 Ways to Speed Up Your Computer's Boot Time
Installing more RAM has always been an effective way of speeding up your computer, and that hasn't changed. RAM is pretty cheap these days, so if you're running low, there's no reason not to stock up and make your computer run a little smoother. We've gone over how to replace it in both a desktop and a laptop, and even for the inexperienced, it's a pretty simple procedure.

2. Give Your Computer a Static IP

Top 10 Ways to Speed Up Your Computer's Boot Time
When you first start up your computer, it spends a significant amount of time asking the network for an IP address. You can get rid of this process altogether by giving your computer a static IP address that never changes. Not only does this make your network easier to manage (since each computer will always have the same IP address), but it can shave a bit more time off your startup. Here's how to do it in different versions of Windows.

1. Install a Solid State Drive

Top 10 Ways to Speed Up Your Computer's Boot Time
These days, your hard drive is probably the biggest bottleneck in your machine. One of the best upgrades you can make to your computer is to install a solid state drive, which has super-fast read times that can speed up your startup considerably. They're certainly not a cheap upgrade, nor are they without their own maintenance requirements, but if you want to speed up your computer and its boot time, you can't go wrong by installing an SSD. The difference will be shocking.

How to upgrade RAM for noobs

Step 1: Prepare your computer

Hack Attack: How to install RAM
To get your computer ready, you need to make it safe. That means turning off the switch on the back of the power supply unit. (If you're going to be using your PSU as a grounded metal source, you'll want to keep it plugged in. If you have another ground, it's best to unplug the computer completely.) After turning off the power supply, wait at least 10 seconds before cracking open your case to allow the motherboard's capacitors to discharge. Once you've done this, you can sigh a deep breath of relief - you've circumvented the most dangerous aspect of installing RAM - electricity.
Once you've rendered your computer powerless, it's time to open up your case. This process varies from case to case, but it's relatively simple, especially with newer cases, and usually involves the removal of a couple of screws and a side panel. This should give you easy access and plenty of room to install your RAM.
Hack Attack: How to install RAM
While working inside your case, be mindful of static electricity. To avoid building up a static charge that could potentially short out a component, some people use an anti-static strap to ground themselves (available from most computer hardware retailers). I prefer not to use the strap. Instead, remember to touch a grounded metal surface from time to time to prevent a static charge from building. Touching your computer's power supply unit (provided it remains plugged in and turned off) should do the trick.
Step 2: Find and prepare an empty RAM socket
Hack Attack: How to install RAM
This is easy enough. Just locate the RAM sockets on your motherboard and find an empty one. If you've never installed RAM in your computer, you should have at least one or two empty slots. When you're choosing the socket in which to install your RAM, again you should consult your manual. For example, your motherboard may require you to fill the sockets in a particular order. In my installation, my motherboard supports dual-channel mode, but the sticks of RAM need to be installed in the correct sockets for this to work.
Next, the RAM retaining clips need to be opened up in order for RAM to be installed. All you need to do is press the retaining clips outward, opening the socket for installation.
Hack Attack: How to install RAMStep 3: Install your RAM
Now pick up your stick of RAM by the edges - its best not to get your fingerprints all over the
working parts of the memory itself. The RAM should be slotted so that it can fit in the socket only one way, so just line up the slotted RAM with your motherboard's RAM socket.
Firmly press the RAM until it is seated securely in the socket. If your socket has retaining clips, press down until the clips snap back into place.
Hack Attack: How to install RAM
After this, your RAM should be properly seated and installed.

Step 3: Finishing up

It's all pretty simple from here on out. Replace your computer's side panel and screw it into place. Plug in your power supply unit (remembering to flip the switch back on) and boot up.
Hack Attack: How to install RAM
Now you're back in the realm of software where you're the undisputed master. To verify that your RAM upgrade was successful, right-click on My Computer and select Properties. Under "Computer," your expanded RAM size should be listed. If everything went well, you should see more MBs of RAM than you had before your installation.
Easy, right? Who knew upgrading your computer didn't involve a trip to the landfill followed by a phone call to Dell? Your newfound ability to install RAM should help out with those long load times and major system slow-downs you've been putting up with lately.
Copied from http://lifehacker.com

Study laaaa

copied from webopedia
computer

What is a Computer?

A computer is a programmable machine. The two principal characteristics of a computer are: it responds to a specific set of instructions in a well-defined manner and it can execute a prerecorded list of instructions (a program).

Modern Computers Defined

Modern computers are electronic and digital. The actual machinery -- wires,transistors, and circuits -- is called hardware; the instructions and data are called software.
All general-purpose computers require the following hardware components:


  • memory: enables a computer to store, at least temporarily, data and programs.
  • mass storage device: allows a computer to permanently retain large amounts of data. Common mass storage devices include disk drives and tape drives.
  • input device: usually a keyboard and mouse, the input device is the conduit through which data and instructions enter a computer.
  • output device: a display screen, printer, or other device that lets you see what the computer has accomplished.
  • central processing unit (CPU): the heart of the computer, this is the component that actually executes instructions.

  • In addition to these components, many others make it possible for the basic components to work together efficiently. For example, every computer requires a bus that transmits data from one part of the computer to another.

    Computer Classification, By Size and Power

    Computers can be generally classified by size and power as follows, though there is considerable overlap:


    • personal computer: a small, single-user computer based on a microprocessor. In addition to the microprocessor, a personal computer has a keyboard for entering data, a monitor for displaying information, and a storage device for saving data.
    • workstation: a powerful, single-user computer. A workstation is like a personal computer, but it has a more powerful microprocessor and a higher-quality monitor.
    • minicomputer: a multi-user computer capable of supporting from 10 to hundreds of users simultaneously.
    • mainframe: a powerful multi-user computer capable of supporting many hundreds or thousands of users simultaneously.
    • supercomputer: an extremely fast computer that can perform hundreds of millions of instructions per second.

    More info here

    How to turn on a computer

    copied from http://www.dummies.com/


    How to Turn On Your PC


    You need to plug in your PC and devices before you can turn them on (obvious, right?). When all your computer components are plugged in and ready to go, turn on the computer:

    1. Turn on all the devices except the monitor and console.
      The order in which you turn everything else on doesn’t really matter.

    2. Turn on the monitor.
      You need to worry about turning on the monitor after all the other devices only if you have the monitor and console connected to a UPS. Otherwise, you can turn on the monitor whenever you like.

    3. Turn on the console last.
      Regardless of whether you’re using a UPS, you need to turn on the console last to allow time for the other devices in the computer system to initialize and get ready for work. That way, the console recognizes them and lets you use those devices in your computer system.

    If everything is plugged into a power strip, ignore these steps and just turn on the power strip.

    More info here

    Sunday, 7 July 2013

    Map of your head


    .                                                             
                                                            "Map Of Your Head"


    I'm sick of feeling my soul
    To people who'll never know
    Just how purposeless and empty they've grown
    Because the language confuses
    like computers refuse to understand how I'm feeling today

    I'm freezing and losing my way
    I don't need another map of your head
    I'm freezing and losing my way
    I don't need another map of your head

    I saw a liquid control
    That gives life to a soul
    I hit my head on it and woke up to know
    That I was all alone
    Wearing just socks and a phone
    Someone's screaming like their world might explode

    Yeah I'm freezing and losing my way
    I don't need another map of your head
    I'm freezing and losing my way
    I don't want another map of your head

    Freezing and losing my way
    I don't want another map of your head
    I'm freezing and losing my way
    I don't need another map of your head

    hello

    hi

    .

    .

    this is a computer

    .

    .

    bye


    biodata


    • afiq zufar bin madzuki

    • 20 years old

    • seremban

    • 015547774509332/01562633030090


    *Call for more info. Bye